CI-S2 Clay, Soil, Cement, FlyAsh, Slag Multifunctional Machine
CI-S hydraulic brick machine could generate great pressure, with quickly moulding time, making the brick with high density. By changing the moulds, all kinds of brick/block/interlocking bricks could be made.
The great innovation is the moulding box will fall down automatically after moulding. No need extra power during this process, a lot of time and labour would be saved. Efficiency will be achieved.
PLC controlled, which can be easily operated by only one person.
One brick would be made in less than 10 seconds, High productivity.
By adjusting the screws, brick height can be changed.
Mould can be changed according to customer's requirements.
Hydraulic pressure to guarantee the brick's density and strength.
| Power | Model CI-S2 = 5.5Kw, Model CI-S4 = 7.5Kw |
| Cycle | 8-10S |
| Voltage | 440V,50HZ,3 Phase |
| Pressure | Hydraulic Pressure 15-22MPA |
| Productivity | Model CI-S2 = 6000 pcs/day, CI-S4 = 10000 pcs/day |
| Material | Clay, Soil, Cement, Fly Ash or Other Construction Dregs |
| Power source | Electric Motor |
The Production capacity data are theoretical and are dependent on machine settings, mix design, aggregates used and other environmental conditions.
